HP Storage Hardware Providers VDS/VSS Installation Guide (5697-1131, August 2011)
Table Of Contents
- HP Storage Hardware Providers VDS/VSS Installation Guide
- Contents
- 1 Overview of HP Storage hardware providers
- 2 Installing HP hardware providers for HP P6000 disk arrays
- Preparing to install HP P6000 hardware providers
- Installing hardware providers for HP P6000 disk arrays
- 3 Installing HP hardware providers for HP P9000 disk arrays
- Preparing to install HP P9000 hardware providers
- Installing hardware providers for HP P9000 disk arrays
- 4 Troubleshooting the HP hardware providers
- 5 Support and other resources
- Glossary
- Index
![](/manual/hp/hp-svsp-plug-in-for-oracle-em/hp-storage-hardware-providers-vdsvss-installation-guide-5697-1131-august-2011/images/img-15.png)
Figure 7 Mirrorclone-Snapshot tab settings window
.
Configuring mirrorclones
The Mirrorclone tab in the Settings window enables you to select a disk group and modify the
mirrorclone properties.
You can:
• Select the redundancy level from the Select redundancy type for Mirrorclone vdisk list:
• Default – Same as source
• Vraid0 – No redundancy
• Vraid1 – Mirroring
• Vraid5 – Data plus parity
• Vraid6 – Double parity disks
• Select the mirrorclone deletion mode:
• Sync – Unpresents the mirrorclone from the local host and resets the Mirrorclone pair status to
resync state
• Delete – Deletes the mirrorclone
HP Storage Hardware Providers VDS/VSS Installation Guide 21