HP Systems Insight Manager 6.3 User Guide

2. Select one of the following:
• All Storage Systems
• All Storage Hosts
• All Storage Switches
• All Storage Arrays
• All Tape Libraries
The system table view page for that collection appears.
Viewing individual storage systems
Procedure 30 Viewing individual storage systems
1. In the System and Event Collections panel, expand Systems, Shared, Systems by Type, and
Storage Systems.
2. Expand the storage system collection that contains the system you want to view.
3. Click the name of the storage system you want to view.
The System Page for that system appears.
Viewing storage system reports
Systems Insight Manager provides predefined and customized storage system reports.
If HP Storage Essentials is installed, no data appears in the Systems Insight Manager storage system
reports. This information appears because Systems Insight Manager data collection from SMI-S
devices is disabled to avoid duplicate data collection from both Systems Insight Manager and HP
Storage Essentials. For information about storage system reporting with HP Storage Essentials, see
your HP Storage Essentials documentation.
Existing storage system reports
The following predefined storage system reports are available:
• Storage Device Capacity—All Storage Arrays
Lists capacity usage details for all storage arrays.
• Storage Device Controllers—All Storage Arrays
Lists the status, port count, and number of ports utilized for each storage array controller.
• Storage Device Inventory—All Storage Arrays
Lists vendor, status, and port information for each storage array.
• Storage Device Inventory—All Storage Switches
Lists vendor, status, and port information for each storage switch.
• Storage HBAs—All Storage Hosts
Lists vendor, status, and port information for each host bus adapter (HBA) that is installed on
a storage host.
• Storage Logical Units—All Storage Arrays
Lists LUN information and status for all LUNs on all storage arrays.
• Storage Ports—All Storage Arrays
Lists port information for all storage arrays.
126 Storage integration using SMI-S