HP Systems Insight Manager 5.3 Technical Reference Guide

• Successfully configured SSH for host based authentication.
• Successfully configured SSH for user based authentication.
• Minor
SNMP is not installed on this system, so no SNMP settings were altered. To install SNMP, go to
Control Panel and add the Windows component of Simple NetWork Management Protocol.
•
• SNMP READ-ONLY community string not updated because it already exists with different rights.
• Unable to create an SNMP READ-WRITE community string needed by the HP Web Agent.
• Unable to create a unique ID for a SNMP READ-WRITE community string needed by the HP Web
Agent.
• Array Configuration Utility is running. Not all changes are effective. Manually restart the target
server when convenient.
• No settings were changed. There are no management applications utilizing the HP System
Management Homepage present on this system.
• Failed to create indication subscription.
• Error: Identification launch exception.
• Major
The operating system on the target is not supported.•
• The HP repair tool does not run unless the supplied credentials are for an operating system
administrator. Provide correct operating system administrator credentials for this target and run
the Configure or Repair Agents tool again.
• No input data was supplied to the HP Repair tool.
• Insufficient memory to run HP Repair tool on target system. Stop unnecessary services on the target
and run the Configure or Repair Agents tool again.
• SNMP READ-ONLY community string not updated.
• Failed to change SNMP setting to accept SNMP requests from this instance of HP Systems Insight
Manager.
• Unable to add this instance of HP Systems Insight Manager to the SNMP trap destination list.
• Unable to restart the Insight Management Agents (version 7.1 or earlier). Not all changes are
effective. Manually restart the target server when convenient.
• HP Systems Insight Manager was unable to connect to the target. Retry with administrator credentials
for this target.
• SSH is not installed on the target server. In order to install SSH, use a web browser to browse to
HP Systems Insight Manager, select Deploy from the menu, select Install OpenSSH, and follow
instructions.
• SSH could not be fixed on the target server because the user has not logged in. Log in to the target
server and then run this tool again for that target.
• Unsuccessful running mxagentconfig on HP Systems Insight Manager. SSH is not properly configured
for the target server. Use the Secure Shell (SSH) in HP SIM 5.x white paper at http://
h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html to further
troubleshoot.
• Error while retrieving OS name.
• Error: Windows repair tool execution exception.
• Error when trying to establish SSH connection, to determine operating system name.
• Error: HP-UX SSA tool launch exception.
• Error: Linux SSA tool launch exception.
• Error: Writing SNMP read string.
328 Tools that extend management