HP Systems Insight Manager 5.3 Technical Reference Guide
• 2, Warning
• 3, Minor
• 4, Major
• 5, Critical
• 100, Informational
NOTICEQUERYNAME
. The collection name based on how the notice was generated. This value can say
one of the following:
• This system or event meets the following search criteria: +QueryName;
• This system or event now meets the following search criteria: +QueryName;
• This system or event no longer meets the following search criteria:
+QueryName;
DEVICENAME
. The name of the
system
that caused the notice.
DEVICEIPADDRESSCOUNT
. The number of IP addresses that are mapped to this system.
DEVICEIPADDRESS%d
. Based on the count, %d is an integer that shows the actual IP address. For example:
IF, DEVICEIPADDRESSCOUNT = 2
Then, DEVICEIPADDRESS0 = 111.111.111.111
DEVICEIPADDRESS1 = 222.222.222.222
DEVICEMACADDRESSCOUNT
. The number of MAC addresses collected for the system. Before this information
is available, you must run a Data Collection task.
DEVICEMACADDRESS%d
. Based on the MAC address count, %d is an integer that references the actual
MAC address environment variable. For example:
IF, DEVICEMACADDRESSCOUNT = 2
Then, DEVICEMACADDRESS0=00:80:5F:7F:B0:81
DEVICEMACADDRESS1=00:80:C7:29:EF:B6
GENERICTRAPID
. The SNMP Generic Trap ID of the trap received, if this is an event-based list and originated
from an
SNMP trap
.
SPECIFICTRAPID
. The SNMP Specific Trap ID of the trap received, if this is an event-based list and originated
from an SNMP trap.
Path
. The Path environment variable value from the context where the service is running
SystemRoot
. The SystemRoot environment variable value, from the context where the service is running.
Windir
. The Windir environment variable value, from the context where the service is running.
COMPUTERNAME
. The COMPUTERNAME environment variable value, where the context in which the
service is running.
MPIP
. The the IP address of the associated management processor.
MPNAME
. The name of the associated management processor.
RELATEDDEVICECOUNT
. The number of associated systems.
RELATEDDEVICENAME%d
. The name of the associated system, where %d is the iteration number. For
example:
IF, RELATEDDEVICECOUNT = 2
Then, RELATEDDEVICENAME0=DeviceName0
RELATEDDEVICENAME1=DeviceName1
RELATEDDEVICEIP%d
. The IP address of the associated system, where %d is the iteration number. For
example:
IF, RELATEDDEVICECOUNT = 2
Then, RELATEDDEVICEIP0=111.111.111.111
RELATEDDEVICEIP1=222.222.222.222
Custom tools 341