HP Systems Insight Manager 5.3 Technical Reference Guide

4. Under Access Rights, select the access rights for the user. Usually, a user is granted the Console
Access right.
• Console access
• Power access
• Management processor configuration
• User administration
5. Click Run Now to run the task immediately. Click Previous to return to the previous New User page.
Related procedure
▲ Controlling the system locator LED through management processors
Editing management processor users
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→Modify User. The
Modify User page appears.
2. Select target management processors, and then click Next. For information about selecting targets, see
“Creating a task”. The Step 2: Enter properties to modify an existing user account page appears.
3. Under Enter the login name of the user account you wish to modify, enter the Login Id to be
modified.
4. Under Select the properties you wish to modify for this user account, select from the following
to modify and enter the appropriate information:
• Password If you select to change the password, verify the password in the Password (Verify)
field.
• User name Select this field to modify the user name. This is not necessarily the same as the login
name. The maximum allowed length is 25 characters.
• Access rights If you select to modify the access rights, select from Console access, Power
access, Management processor configuration, and User administration. To remove all
access rights for an account, select the Access rights checkbox and leave the Consol access,
Power access, Management processor configuration, and User administration checkboxes
unselected.
5. Click Run Now to run the task immediately or click Previous to return to the previous Modify User
page.
Related procedures
• Creating new users on management processors
• Deleting management processor users
Deleting management processor users
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→Delete User. The
Delete User page appears.
2. Select target management processors, and then click Next. See “Creating a task” for information about
selecting targets. The Step 2: Enter properties to delete an existing user account page appears.
3. Enter the Login Id to be deleted.
4. Click Run Now to run the task immediately or click Previous to return to the previous Delete User
page.
NOTE: HP SIM uses the Admin account to execute management processor tools. If this account is removed
from iLO systems, the tools cannot access the iLO systems unless tool execution is reconfigured.
To configure HP SIM tool execution on a different iLO account:
1. Select a user account to run tools on iLO systems. This user account must be present on all managed
iLOs and must have all rights on the iLO systems.
2. Navigate to the tools directory on the CMS and edit MpTools.xml.
Management processor tools 389