HP Systems Insight Manager 5.3 Technical Reference Guide

Related procedure
▲ Turning off the UID for a system managed by an HP ProLiant iLO
Turning off the UID for a system managed by an HP ProLiant iLO
1. Select Tools→Management Processor→HP ProLiant iLO→Turn Off Unit Identification Light.
The Turn Off Unit Identification Light page appears.
2. Select target system, and then click Next. For information about selecting targets, see “Creating a task”.
The Step 2: Task confirmation page appears.
3. Click Run Now to run the task immediately, click Schedule to schedule the task to run at another time,
or click Previous to return to the previous Turn Off Unit Identification Light page. For more information
about scheduling a task, see “Scheduling a task”.
Related procedure
▲ Turning on the UID for a system managed by an HP ProLiant iLO
Managing Communications
Use the Manage Communications feature to troubleshoot communication problems between the CMS and
targeted systems. For each failed communication function, troubleshooting information is available. You can
reconfigure communication settings, launch agents, and push certificates to target systems. This feature is
available from the Configure→Manage Communications menu and includes the following information:
• Communication status
• Manage Communications table columns
• Manage Communications main page buttons
Communication status
The communication status between the CMS and the targeted systems appear in the table. Placing your
mouse over a status icon displays available information explaining the status. If you click the status icon, the
Advise and Repair section appears with the corresponding tab open. For example, if you click a status
icon in the Run Tools column, the Run Tools tab is open in the Advise and Repair section instead of the
default Identification tab.
Managing Communications 393