HP Systems Insight Manager 5.3 Technical Reference Guide

In HP SIM, you can name orphan systems in the following ways:
• < serialNumber > Where < serialNumber > is replaced with the serial number of the system.
• < serialNumber >-< devKey >-< oldName > Where < serialNumber > is replaced with the serial number
of the system, < devKey > is replaced with the devKey on the system, and oldName > is replaced with
the old system name.
• < devKey > Where < devKey > is replaced with the devKey on the system.
Product Description
NOTE: Expand this section by clicking . Collapse it by clicking .
This section includes:
• System Type The basic system type returned from identification
• Product Model The product model (name) defined by the manufacturer
• Hardware Description The description of the hardware obtained from the Edit System Properties
page
• Management Protocols The management protocols that have responded when attempting to identify
the system
Note: If more protocols are expected, verify the credentials configured on the System Protocol Settings
page.
Entitlement Information
• Start Date The starting date of the contract or warranty
• End Date The end date of the contract or warranty
• Type The contract type, if a service contract exists
• Status The current contract or warranty status
• Last Collection The date that contract and warranty data was last collected
Related topics
• System Page
• Tools & Links tab
• Navigating the event table view page
System tab for clusters
Based on the type of cluster provider and the version of cluster providers, not all properties are available at
all times. If a property does not have a value, the property does not appear on this page. This page is for
all clusters except for MSCS clusters. They are monitored using Cluster Monitor. For more information, see
“Using Cluster Monitor”.
The Quick Launch hyperlink links to a short list of frequently used tools. Place your cursor over the link to
expand the menu and view the tools available for displayed systems. Selecting a tool from this list bypasses
the target verification page of the Task Wizard. You cannot schedule tools launched from this menu. Customize
this menu by clicking the Customize link in the Quick Launch menu.
Health Status
Each link under Health Status links to the System Page of a cluster member. The cluster status is a
combination of cluster member statuses in the cluster. The most critical status is shown.
System Page 449