HP Systems Insight Manager 5.3 Technical Reference Guide

Where quanit1 is the system name.
Related procedures
• Managing event handling tasks
• Creating an automatic event handling task
• Configuring event filters for registered SNMP traps
• Configuring modem settings for paging on Windows systems
• Configuring e-mail settings
Related topic
▲ Events
Service notification events
The HP Services analysis tools, WEBES , and OSEM , generate service notifications to HP SIM through a
specific SNMP trap type or SOAP event if analysis has determined that there are serviceable events.
The SNMP trap capability is supported in WEBES 4.4.1 or later and OSEM 1.3 or later. The SOAP event
notification is supported with WEBES 5.0, OSEM 1.4.1, and HP SIM 5.2.
To download these tools and installation instructions, go to http://h18023.www1.hp.com/support/svctools/
.
You can obtain OSEM from the SmartStart Management CD .
If HP Insight Remote Support Pack is installed, the service notification provided by WEBES and OSEM also
provides status about remote support incidents. See “HP Service Essentials Remote Support Pack” for more
information about Remote Support Pack.
Host configuration and setup
No special OSEM setup is required as long as these tools are on the same system as HP SIM because the
service traps are normally sent to localhost by default and you accept the default SNMP settings. If OSEM
is on a separate system from HP SIM, you must perform the procedure outlined in the How to Change the
HP SIM Host Name section of the OSEM Installation Guide .
In the case of WEBES, enter desta snmp from the operating system command line.
You are prompted for the system to send the service traps to and you must enter the HP SIM system name
regardless of whether WEBES and HP SIM are on the same system.
Events 561