HP Systems Insight Manager 5.3 Technical Reference Guide

DescriptionData TypeColumn Name
The architecture of the processors on this cell; values are
Unknown(0), Other(1), PA-RISC(2) and Itanium®-based(3)
SMALLINTCellArchitecture
Status of this component; values are: Unknown(0), Other(1),
Powered Off(2), Powering On(3), Inactive(4), Active(5) (A
component is powering on when power has been turned
on, but it is still performing power-on self-tests (POST). A
component is Inactive if it has completed POST, but has not
joined its nPartition. This might be because the component
is not assigned to a nPartition, if it is assigned to a nPartition
and the nPartition is not active, if the component failed
during nPartition boot, if the component was assigned to
an active nPartition and no reboot or shut down for
reconfiguration of the nPartition has been done, or the
component has been configured to remain inactive when
the nPartition boots. A component is active when it has
joined a nPartition during boot. Note that the status of the
component does not imply anything about the state of the
operating system on the nPartition. The component will be
active, for example, while the operating system is still in
the boot process. The status is Unknown if a failure occurred
while getting the data for this component.)
SMALLINTComponentStatus
The number of installed processors that are configured for
use. Processors may be deconfigured by the OS or by
system firmware.
Note: This property may not be available when the cell is
powered off.
SMALLINTCPUCountOK
Amount of functional memory installed on the cell, in
megabytes.
Note: This property may not be available when the cell is
powered off.
BIGINTTotalMemoryOK
Indentifies the type of each cell. Possible values are
Unknown (0), Other (1), Floating (2), Base(3), and Free(4).
User settable.
SMALLINTCellType
Partition ID of the nPartition in to which this cell is assigned.INTdc_PartitionID
NVARCHAR(255)R_SlotID
NVARCHAR(255)R_SlotInCab
HP_NParComplex table
DescriptionData TypeColumn Name
LUID uniquely defining this table rowBIGINTNParComplex_LUID
Node partly identifies HP_NParComplexBIGINTNodeID
Snapshot partly identifies HP_NParComplexBIGINTSnapshotID
Profile ID of the NPar ComplexINTProfileID
Number of compute cabinets in the complexINTdc_ComputeCabCount
Number of IOX cabinets in the complexINTdc_IOXCabCount
Name of the NPar ComplexNVARCHAR(256)ComplexName
Displayable revision stringNVARCHAR(256)RevisionString
The maximum number of nPartitions that this complex can
support (For example, an rp7410 system can support no
more than 2 nPartitions.)
SMALLINTMaxPartitionsSupported
The serial number of the complex as assigned by the
original manufacturer
NVARCHAR(256)CreatorSerialNumber
Database tables 701