HP Systems Insight Manager 5.3 Technical Reference Guide

DescriptionData TypeColumn Name
The name of the product as assigned by the OEM
manufacturer (This property is supported only on
Itanium®-based platforms but might not be present on all
of those.)
NVARCHAR(256)CreatorProductName
The name of the product as assigned by the OEM
manufacturer (This property is supported only on
Itanium®-based platforms but might not be present on all
of those.
NVARCHAR(256)OEMSerialNumber
The serial number of the complex as assigned by an OEM
manufacturer (This property might not be supported on all
platforms.)
NVARCHAR(256)OEMSerialNumber
The name of the product as assigned by the OEM
manufacturer (This property is supported only on
Itanium®-based platforms but might not be present on all
of those.)
NVARCHAR(256)OEMProductName
The product order number for this complex as originally
delivered, for example, AxxxxxA (If the complex has been
upgraded, this is the product order number before the
upgrade.)
NVARCHAR(256)OriginalProductOrderNumber
The product order number for this complex as it current
exists (If the complex has been upgraded, this is the product
order number after the upgrade.)
NVARCHAR(256)CurrentProductOrderNumber
A 16-byte value used for software licensing (This property
might not be supported on all platforms.)
NVARCHAR(128)UUID
Array of values, indexed by cell ID; provides the nPartition
ID of the nPartition in to which this cell is assigned or 255
if the cell has type equal to Free, user settable (On iCOD
systems, requires iCOD software approval to modify.)
NVARCHAR(256)CellAssignments
Product Name of the System. For example,
9000/800/SD32A
NVARCHAR(256)ProductName
Number of Inactive Cells in this ComplexINTdc_InactiveCells
Cell slotsINTdc_CellSlots
Cell Usage Rights, which represents authorized cellsINTcellUsageRights
Core Usage Rights, which represents authorized coresINTcoreUsageRights
Cells Without Usage Right, which represents iCAP cellsINTcellsWithoutUsageRights
Cores without Usage Rights, which represents iCAP
cores/entry
INTcoresWithoutUsageRights
iCAPCompliant column value is derived from cellCompliant
and cpuCompliant properties. iCAPCompliant =
cellCompliant && cpuCompliant
Nvarchar(5)iCAPCompliant
Available cell slotsINTdc_AvailableCellSlots
HP_NParIOChassis table
DescriptionData TypeColumn Name
LUID uniquely defining this table rowBIGINTNParIOChassis _LUID
Node partly identifies HP_NParIOChassisBIGINTNodeID
Snapshot partly identifies HP_NParIOChassisBIGINTSnapshotID
ID of the cellINTConnectedCellID
Number of occupied PCI slots in this chassis.SMALLINTPopulatedPCISlotCount
702 Reference information