HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

Configuring LAN access on management processors
This tool enables you to modify LAN access settings on one or more HP Integrity and HP 9000 Integrated
Lights Out (iLO) systems.
To modify LAN access:
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→LAN Access. The
LAN Access page appears.
2. Select target management processors, and then click Next. See “Creating a task” for information about
selecting targets. The Step 2: Enter LAN access settings page appears.
3. Under Select the settings you wish to configure and choose their values, select from:
• Telnet access Select to Enable or Disable Telnet access. This does not affect the IP configuration
or the ability of the management processor to perform upgrades over the LAN.
• Web SSL Select to Enable or Disable Web SSL.
• Web console port If you select this option, you must enter a valid port number. Valid port numbers
are 23 and 2000 through 2400.
• IPMI over LAN access Select to Enable or Disable IPMI over LAN access.
4. Click Run Now to run the task immediately. Click Schedule to schedule when the task runs, or click
Previous to return to the previous LAN access page. See “Scheduling a task” for information about
scheduling a task.
Configuring LDAP settings on management processors
This tool enables you to configure the LDAP service on one or more HP Integrity and HP 9000 Integrated
Lights Out (iLO) systems.
To configure the LDAP service:
1. Select Configure→Management Processor→HP Integrity and HP 9000 iLO→LDAP Settings. The
LDAP Settings page appears.
2. Select target management processors, and then click Next. See “Creating a task” for information about
selecting targets. The Step 2: Enter LDAP directory settings page appears.
3. Under Select the settings you wish to configure and choose their values, select from the following:
• Local user accounts Select to Enable or Disable access to local iLO user accounts. If local user
accounts are enabled, a user can log in to iLO using locally stored user credentials. If local user
accounts are disabled, user access is limited to valid directory credentials only.
• Directory authentication Select to Enable or Disable to activate or deactivate directory support
on the selected iLOs. If directory authentication is enabled and configured properly, users can log
in to iLO using directory credentials. If this is disabled, user credentials are not validated using the
directory.
• Directory server IP address Enter the IP address of the directory server.
• Directory server LDAP port Enter the LDAP for secure LDAP service on the server. The default
value for this port is 636.
• Distinguished name Specifies where this iLO instance is listed in the directory tree. For example:
cn=MP Server.ou=Management Devices.o=hp
• User search context 1 User name contexts that are applied to the login name entered to access
iLO.
374 Tools that extend management