HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide
• About administering events
• Examples of e-mail pages
• Creating a paging task based on e-mail notification
Configuring modem settings for paging
Perform the following procedure to specify the COM port used by the modem to send pager messages.
NOTE: You can configure modem settings in Windows only.
To set modem settings for paging:
1. Select Options→Events→Automatic Event Handling→Modem Settings. The Modem Settings
page appears.
2. From the COM port field, select the appropriate COM port. See your modem documentation for details.
3. Click OK to save the setting.
Related procedures
• Creating an automatic event handling task
• Editing automatic event handling tasks
• Copying automatic event handling tasks
• Viewing task definitions
• Viewing event task results
• Enabling or disabling automatic event handling tasks
• Deleting events
• Configuring e-mail settings
Related topics
• Events
• Examples of e-mail pages
Clearing events
1. Select Options→Events→Clear. The Clear Events page appears.
2. Select the target events. Refer “Creating a task” for more information about selecting targets.
3. Click Apply.
4. Click Run Now to clear the events immediately and view the Task Results page, or click Schedule
to schedule the deletion. See “Scheduling a task” for more information about scheduling the task to run.
NOTE: When an event is cleared in HP Systems Insight Manager (HP SIM), it is also cleared in HP Storage
Essentials.
When an event is cleared in HP Storage Essentials, it is also cleared in HP SIM.
Related procedures
• Configuring e-mail settings
• Configuring modem settings for paging
• Creating an automatic event handling task
• Managing event handling tasks
• Configuring event filters for registered SNMP traps
• Configuring SNMP traps
• Configuring status change events
• Deleting events
552 Administering systems and events