PCoIP Management Console User Manual (Issue 12)

PCoIP Management Console User Manual
TER0812002 Issue 12 63
enable it for each group by clicking the checkbox. When Persistent AutoConfig is enabled,
devices that qualify to be in the group periodically get the group’s profile applied if one or
more settings are different. Conditions 1, 2 and 3 must be true for Persistent AutoConfig to
work. The MC checks these conditions every hour to determine the action of Persistent
AutoConfig.
 Condition 1
The AutoConfig feature is enabled.
 Condition 2
The Persistent AutoConfig is enabled.
 Condition 3
The MC AutoConfig Group option is empty and the zero client is
already in the same group.
OR
The DHCP Option Matching is on, the MC AutoConfig Group
option is set to the identical group, the MC AutoConfig Behavior
option is set to 0, and the zero client is in the same group.
OR
The DHCP Option Matching is on, the MC AutoConfig Group
option is set to the identical group, the MC AutoConfig Behavior
option is set to 1, and the zero client is in any group.
Note: Passwords and IP addresses are not compared during the Persistent AutoConfig
process.
The following examples show how AutoConfig rules are applied. The MC is configured with
AutoConfig enabled and has three AutoConfig rules.
Table 4-3: Example AutoConfig Rules
Group
IP Range Cdn3
Persistent AutoConfig Cdn2
Group A
DHCP Option Matching OFF
<Empty>
[ ]
Group B
DHCP Option Matching OFF
<Empty>
[x]
Group C
DHCP Option Matching ON
<Empty>
[x]
Table 4-4: Example AutoConfig Rule Application
Note: AutoConfig is enabled so condition 1 is always true.