PCoIP Management Console User Manual (Issue 12)

PCoIP Management Console User Manual
TER0812002 Issue 12 68
 Device Family: This column shows the device family type to which each property setting
applies. Figure 4-22 shows one encryption property for all devices, two for Tera1 device
family and two for Tera2 device family. Setting Tera1 property values has no effect on
the Tera2 devices and vice versa.
 Property Name
 Value: The fields in this column determine the value of each profile setting.
 Description
Figure 4-22: Encryption Configuration Settings Dialog Box
4.4.5.1 OSD Logo in a Profile
To upload a logo for the OSD into a profile (the logo is then applied to the devices groups
with that profile):
1. Prepare an image file that is a 24bpp bitmap that does not exceed 256 pixels by 64 pixels.
2. Choose Profile OSD Logo, and then Set OSD Logo.
3. Click Browse to locate your image file.
4. Click Upload to import the file to the MC.
Figure 4-23: Add OSD Logo Property
4.4.5.2 Firmware in a Profile
You can assign a firmware file in a profile along with upgrade criteria that must be met
before the firmware is pushed to each device.
To associate firmware with a profile:
1. Make sure the firmware file is imported into the MC (see section 4.6.1).
2. Choose Profile Firmware, and then Set Firmware in the profile properties.