PCoIP Management Console User Manual (Issue 12)

PCoIP Management Console User Manual
TER0812002 Issue 12 79
4.7 Device Log Monitoring
The Device Log Monitoring webpage, shown in Figure 4-36, lets you collect logs over time
from a selection of PCoIP devices.
The Device Log Monitoring webpage lets you:
 Choose devices to be monitored
 Start and stop log monitoring of the chosen devices
 Download a .tar.gz archive of collected logs
 View status of log monitoring
 View individual device log
Figure 4-36: Device Log Monitoring Webpage
4.7.1 Device Tree
The device tree displays grouped devices and lets you select which devices are monitored.
When you use the checkboxes for individual devices, you can select all zero clients or hosts
within a group, an entire group, or all grouped devices for monitoring. Once log monitoring is
started, you cannot change the selection until it is stopped. The same display filters that
appear in the Devices page are included here.
You can enable up to 200 devices for log monitoring at a time.
4.7.2 Logging Controls
After you select the devices using the device tree, you can set the event log filter mode to
verbose or terse. This setting overrides profile settings and settings made directly on the
device. If the device is set to a different event log filter mode during log monitoring, it is
overwritten to the setting made here the next time logs are retrieved by the log monitoring
process.
To begin monitoring logs, click Start. This empties the MC’s storage of any previously
collected logs and starts the log monitoring process. You cannot change the selection of