PCoIP Zero Client and Host Administrator Guide (Issue 5)

Table 4-21: Connection Management Interface Connections
Management
Tool
Device(s) Session Connection Options
MC All Connection Management Interface
AWI Host Connection Management Interface
Client Connection Management Interface
OSD Client Connection Management Interface
7.7.2 MC: Direct to Host Session Settings
Select the Direct to Host session connection type from the MC to configure a profile to
connect clients directly to hosts.
This selection requires a device restart after being changed.
Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
Note: For information on how to link specific hosts and clients, see "PCoIP® Management
Console User Manual" (TER0812002). To configure a specific host with peering properties
(e.g., to accept any peer rather than a specific MAC address), use the AWI's Direct from
Client session settings.
Figure 4-14: MC Session Connection Type – Direct to Host
TER1206003 Issue 5 108
PCoIP® Zero Client and Host Administrator Guide