PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-15: MC Session Connection Type – Direct to Host + SLP Host Discovery
Table 4-23: MC Session Configuration Parameters
Parameters Description
Enable Auto Reconnect When enabled, lets the client automatically reconnect with the last
connected host when a session is lost.
Note: This property requires a device restart after being changed.
Accept Any Peer When enabled and set to True, the peer MAC address is deleted and
the host is configured to accept any zero client.
Enable Peer Loss
Overlay
When enabled, the “Network Connection Lost” overlay appears on
the display(s) when a loss of network connectivity is detected.
Normal hypervisor scheduling delays can falsely trigger this
message.
Note: This option is only available for a zero client. Desktop
applications that require the peer loss notification should re-enable
the feature through the OSD, AWI, or MC.
Enable Preparing
Desktop Overlay
When enabled, the "Preparing Desktop" overlay appears on the
display(s) when users log in.
Note: This overlay provides assurance that login is proceeding if the
desktop takes more than a few seconds to appear.
TER1206003 Issue 5 112
PCoIP® Zero Client and Host Administrator Guide