PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Certification Check
Mode
Select the level of verification performed on the certificate presented
by the connection server:
l Warn if the connection may be insecure (Default): Configure the
client to display a warning if an unsigned or expired certificate is
encountered, or if the certificate is not self-signed and the zero
client trust store is empty.
l Reject the unverifiable connection (Secure): Configure the
client to reject the connection if a trusted, valid certificate is not
installed.
l Allow the unverifiable connection (Not Secure): Configure the
client to allow all connections.
Certification Check
Lockout Mode
Select whether to lock or unlock Certification Check Mode:
l Unlocked: Select this option to allow users to change the
Certification Check Mode setting using the OSD or AWI.
l Locked: Select this option to prevent users from changing the
Certification Check Mode setting.
Clear Trusted
Connection Server
Cache
When enabled, clears the trusted connection server cache.
Auto Connect Mode This field determines the client's auto connect behavior after startup:
l Enabled: The client automatically connects with the connection
server after startup and a PCoIP session ends, bypassing the
OSD Connect page.
l Disabled: The client does not automatically connect with the
connection server.
l Enabled With Retry On Error: The client will continuously attempt
to contact the connection server. Devices running firmware 4.1.1
or lower do not support Retry On Error behavior and will always
perform a single attempt to contact the connection server when
this option is selected.
Connection Server
Cache Mode
This field determines whether a connection server is dynamically
added to the Server drop-down menu on the OSD Connect page
when a user types in a valid server address, or whether it appears in
a read-only list for the user to select.
l Last servers used: Select this option if you want a list of cached
servers that a user has typed in to appear in the Server drop-
down menu on the OSD Connect page.
l Read-only: Select this option if you want users to select a
connection server from a read-only list.
TER1206003 Issue 5 117
PCoIP® Zero Client and Host Administrator Guide