PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Disconnect Dialog Dis-
play Mode
This field lets you control what type of messages appear when a
session is disconnected. There are three categories:
Information: User- or administrator-initiated actions affecting the
session:
l You have been disconnected because you logged in from
another location or your host was shut down or restarted.
l You have been disconnected because an administrator
disconnected you.
l You have been disconnected because you logged in from
another location.
l You have been disconnected because you disconnected from
your workstation.
Warning: System-initiated, but expected actions affecting the session:
l You have been disconnected because your session timed out.
Error: Unexpected system-initiated actions causing session to fail:
l You have been disconnected.
l Unable to connect (0x1001). Please contact your IT administrator.
l Unable to connect (0x1002). Please contact your IT administrator.
l Session closed remotely.
l Session closed remotely (unknown cause).
l You have been disconnected due to a configuration error (0x100).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x201).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x300).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x301).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x302).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x303).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x305).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x400).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x401).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x402).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x403).
Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error (0x404).
Please contact your IT administrator for assistance.
Note: For detailed information about the above session disconnect
codes, please see Knowledge Base Knowledge Base topic 15134-
872 on the Teradici support site.
TER1206003 Issue 5 120
PCoIP® Zero Client and Host Administrator Guide