PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-17: MC Session Connection Type – View Connection Server + Auto-Logon
Table 4-25: MC Session Configuration Parameters
Parameter Description
View Connection Server
Address
Enter the IP address or the fully qualified domain name (FQDN) of
the View Connection Server.
Auto-Logon Username Enter the username for the client. This username will be sent to the
specified connection server.
Auto-Logon Password Enter the password for the client. This password will be sent to the
specified connection server.
Auto-Logon Domain Enter the domain for the client. This domain will be sent to the
specified connection server.
Desktop Name to Select Enter the pool or desktop name used by the client when starting a
session.
Note: This setting is optional.
Server Port By default, port 443 is used to communicate with the connection
server. If your network is set up to use a non-standard port for secure
connections, enter the port number.
Enable View
Connection Server SSL
When enabled, enables SSL communication with the connection
server.
Note: This property has no effect on devices running firmware
version 4.0.0 or greater because SSL communication with the
connection server is always enabled.
TER1206003 Issue 5 122
PCoIP® Zero Client and Host Administrator Guide