PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-18: MC Session Connection Type – View Connection Server + Kiosk
Table 4-26: MC Session Configuration Parameters
Parameter Description
View Connection Server
Address
Enter the IP address or the fully qualified domain name (FQDN) of
the View Connection Server.
Use Kiosk Custom
Username
When enabled, the login name is presented as "Custom-<XXX>",
where "XXX" is the value of the Kiosk Mode Custom Username.
When disabled, clients use the MAC-based username of the form
"CM-AA:BB:CC:DD:EE:FF."
Kiosk Mode Custom
Username
When Use Kiosk Custom Username is configured to use a custom
username of the form "Custom-<XXX>", enter the value for the "XXX"
component. This field is limited to 13 characters.
Kiosk Mode Password Enter the password to use to access a virtual desktop in Kiosk mode.
Note: This setting is optional.
Server Port By default, port 443 is used to communicate with the connection
server. If your network is set up to use a non-standard port for secure
connections, enter the port number.
Enable View
Connection Server SSL
When enabled, enables SSL communication with the connection
server.
Note: This property has no effect on devices running firmware
version 4.0.0 or greater because SSL communication with the
connection server is always enabled.
TER1206003 Issue 5 127
PCoIP® Zero Client and Host Administrator Guide