PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Enable Session
Disconnect Hotkey
When enabled, users can press the Ctrl+Alt+F12 hotkey sequence to
pop up the "Zero Client Control Panel" overlay, which lets them
disconnect the current session on the workstation or power off the
workstation.
Note: Before users can use this disconnect hotkey sequence, certain
other configuration options must be in place. See Disconnecting from
a Session for details.
Proximity Reader Beep
Mode
Configure whether the proximity card reader beeps when a valid
card is tapped on the reader in OneSign mode:
l Use Existing Setting: Uses the existing setting (affects only
devices runing firmware 4.1.0 or greater)
l Disabled: Disables the feature.
l Enabled: Enables the feature.
TER1206003 Issue 5 133
PCoIP® Zero Client and Host Administrator Guide