PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-21: MC Session Connection Type – PCoIP Connection Manager
Table 4-29: MC Session Configuration Parameters
Parameter Description
PCoIP Connection
Manager Server
Address
Enter the IP address or the fully qualified domain name (FQDN) of the
PCoIP Connection Manager.
Desktop Name to Select Enter the pool or desktop name used by the client when starting a
session.
Note: This setting is optional.
Server Port By default, port 443 is used to communicate with the connection
server. If your network is set up to use a non-standard port for secure
connections, enter the port number.
Certification Check
Mode
Select the level of verification performed on the certificate presented
by the connection server:
l Warn if the connection may be insecure (Default): Configure the
client to display a warning if an unsigned or expired certificate is
encountered, or if the certificate is not self-signed and the zero
client trust store is empty.
l Reject the unverifiable connection (Secure): Configure the
client to reject the connection if a trusted, valid certificate is not
installed.
l Allow the unverifiable connection (Not Secure): Configure the
client to allow all connections.
TER1206003 Issue 5 140
PCoIP® Zero Client and Host Administrator Guide