PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-22: MC Session Connection Type – PCoIP Connection Manager + Auto-Logon
Table 4-30: MC Session Configuration Parameters
Parameter Description
PCoIP Connection
Manager Server
Address
Enter the IP address or the fully qualified domain name (FQDN) of
the PCoIP Connection Manager.
Auto-Logon Username Enter the username for the client. This username will be sent to the
specified connection server.
Auto-Logon Password Enter the password for the client. This password will be sent to the
specified connection server.
Auto-Logon Domain Enter the domain for the client. This domain will be sent to the
specified connection server.
Desktop Name to Select Enter the pool or desktop name used by the client when starting a
session.
Note: This setting is optional.
Server Port By default, port 443 is used to communicate with the connection
server. If your network is set up to use a non-standard port for secure
connections, enter the port number.
TER1206003 Issue 5 145
PCoIP® Zero Client and Host Administrator Guide