PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Certification Check
Mode
Select the level of verification performed on the certificate presented
by the connection server:
l Warn if the connection may be insecure (Default): Configure
the client to display a warning if an unsigned or expired certificate
is encountered, or if the certificate is not self-signed and the zero
client trust store is empty.
l Reject the unverifiable connection (Secure): Configure the
client to reject the connection if a trusted, valid certificate is not
installed.
l Allow the unverifiable connection (Not Secure): Configure the
client to allow all connections.
Certification Check
Lockout Mode
Select whether to lock or unlock Certification Check Mode:
l Unlocked: Select this option to allow users to change the
Certification Check Mode setting using the OSD or AWI.
l Locked: Select this option to prevent users from changing the
Certification Check Mode setting.
Auto Connect Mode This field determines the client's auto connect behavior after startup:
l Enabled: The client automatically connects with the connection
server after startup and a PCoIP session ends, bypassing the
OSD Connect page.
l Disabled: The client does not automatically connect with the
connection server.
l Enabled With Retry On Error: The client will continuously
attempt to contact the connection server. Devices running
firmware 4.1.1 or lower do not support Retry On Error behavior
and will always perform a single attempt to contact the
connection server when this option is selected.
Connection Server
Cache Mode
This field determines whether a connection server is dynamically
added to the Server drop-down menu on the OSD Connect page
when a user types in a valid server address, or whether it appears in
a read-only list for the user to select.
l Last servers used: Select this option if you want a list of cached
servers that a user has typed in to appear in the Server drop-
down menu on the OSD Connect page.
l Read-only: Select this option if you want users to select a
connection server from a read-only list.
TER1206003 Issue 5 146
PCoIP® Zero Client and Host Administrator Guide