PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameters Description
Enable DSCP When enabled, the device populates the Differentiated Services
Code Point (DSCP) field in the IP header, allowing intermediate
network nodes to prioritize PCoIP traffic accordingly.
Enable Transport
Congestion Notification
When enabled, transport congestion notification is enabled to allow
PCoIP endpoints to react accordingly if an intermediate network
node sets the congestion notification bit in either the IP header or
PCoIP transport header.
Note: For more information about the PCoIP transport header, see
PCoIP Packet Format.
7.7.12 AWI Client: Direct to Host Session Settings
Select the Direct to Host session connection type from the Configuration > Session page
to configure the client to connect directly to a host.
Figure 4-24: AWI Session Connection Type – Direct to Host
Table 4-32: AWI Session Page Parameters
Parameters Description
DNS Name or
IPAddress
Enter the IPaddress or DNS name for the host.
TER1206003 Issue 5 151
PCoIP® Zero Client and Host Administrator Guide