PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-25: AWI Session Connection Type – Direct to Host + SLP Host Discovery
Table 4-33: AWI Session Page Parameters
Parameters Description
Enable Auto-Reconnect When enabled, lets the client automatically reconnect with the last
connected host when a session is lost.
Enable Peer Loss
Overlay
When enabled, the “Network Connection Lost” overlay appears on
the display(s) when a loss of network connectivity is detected.
Normal hypervisor scheduling delays can falsely trigger this
message.
Note: This option is only available for a zero client. Desktop
applications that require the peer loss notification should re-enable
the feature through the OSD, AWI, or MC.
Enable Preparing
Desktop Overlay
When enabled, the "Preparing Desktop" overlay appears on the
display(s) when users log in.
Note: This overlay provides assurance that login is proceeding if the
desktop takes more than a few seconds to appear.
Enable Session
Disconnect Hotkey
When enabled, users can press the Ctrl+Alt+F12 hotkey sequence to
pop up the "Zero Client Control Panel" overlay, which lets them
disconnect the current session on the workstation or power off the
workstation.
Note: Before users can use this disconnect hotkey sequence, certain
other configuration options must be in place. See Disconnecting from
a Session for details.
TER1206003 Issue 5 156
PCoIP® Zero Client and Host Administrator Guide