PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
You can choose to display:
1. Show All messages – This option shows all disconnect
messages including Info, Warning, and Error messages.
2. Show Error and Warnings Only – This option hides info
messages and displays only error and warning messages.
3. Show Error Only – This option hides Info and Warning messages
and displays only Error messages.
4. Show None – Don’t show any disconnect messages.
Custom Session SNI When enabled, sets a customized Server Name Indication (SNI)
string on authorized man-in-the-middle-enabled clients. The SNI
string is appended to the SSL/TLS HELLO when the client initates an
SSL connection with the host.
Enable DSCP When enabled, the device populates the Differentiated Services
Code Point (DSCP) field in the IP header, allowing intermediate
network nodes to prioritize PCoIP traffic accordingly.
Enable Transport
Congestion Notification
When enabled, transport congestion notification is enabled to allow
PCoIP endpoints to react accordingly if an intermediate network
node sets the congestion notification bit in either the IP header or
PCoIP transport header.
Note: For more information about the PCoIP transport header, see
PCoIP Packet Format.
7.7.20 AWI Host: Connection Management Interface Session Settings
Select the Connection Management Interface session connection type from the
Configuration > Session page to configure an external connection manager as the
connection broker for the host to use.
Note: External connection managers can simplify the administration effort for large,
complex systems. In a managed connection, an external connection manager server
communicates with a device, and can remotely control and configure it. The connection
manager can also locate an appropriate peer for the device to connect to, and then initiate
the connection.
TER1206003 Issue 5 196
PCoIP® Zero Client and Host Administrator Guide