PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-41: Advanced Settings
Table 4-44: OSD Session Page Parameters
Parameter Description
Server URI Enter the Uniform Resource Identifier (URI) .for the PCoIP
Connection Manager (e.g., http:/archdesktop.mycompany.com).
Desktop Name to Select Enter the pool or desktop name used by the client when starting a
session.
Note: This setting is optional.
Auto Connect This field determines the client's auto connect behavior after startup:
l Enabled: The client automatically connects with the connection
server after startup and a PCoIP session ends, bypassing the
OSD Connect page.
l Disabled: The client does not automatically connect with the
connection server.
l Enabled With Retry On Error: The client will continuously
attempt to contact the connection server. Devices running
firmware 4.1.1 or lower do not support Retry On Error behavior
and will always perform a single attempt to contact the
connection server when this option is selected.
Note: After enabling Auto Connect, the client must be power-cycled
for the change to take effect.
Remember Username When enabled, the username text box automatically populates with
the last username entered.
TER1206003 Issue 5 211
PCoIP® Zero Client and Host Administrator Guide