PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-49: Advanced Settings
Table 4-48: OSD Session Page Parameters
Parameter Description
DNS Name or IP
Address
Enter the VMware View Connection Server's DNS name or IP
address.
Username Select the type of username that matches the naming you use for the
devices on the View Connection Server.
l Zero Client MAC: Select this option to automatically populate the
Username field with the MAC address of the zero client.
l Custom: Enter the username for the zero client. This username
has the prefix "Custom."
When Custom is selected as the username type, enter the value for
this component of the custom username. This field is limited to 13
characters.
Password To password protect the virtual machine for the kiosk, enter a
password in this field. This password must match the one entered for
the device in the View Connection Server.
Port By default, port 443 is used to communicate with the connection
server. If your network is set up to use a non-standard port for secure
connections, enter the port number.
Use OSD Logo for Login
Banner
When enabled, the OSD logo banner appears at the top of login
screens in place of the default banner. You can upload an OSD logo
from the OSD Logo Upload page.
TER1206003 Issue 5 227
PCoIP® Zero Client and Host Administrator Guide