PCoIP Zero Client and Host Administrator Guide (Issue 5)

l For Tera2 host cards, you can now enable a host hot plug delay to resolve black
screen issues with certain Linux GPU driver timing expectations. This feature is
available from the AWI Monitor Emulation page, or you can configure a profile for
Tera2 host cards with this feature from the MC Display page.
l Portuguese (Brazilian ABNT) and Slovak (AWERTY and AWERTZ) keyboard layouts
are now supported for Tera1 and Tera2 zero clients.
2.2.2 VDI-specific
l The following smart cards and eToken devices are now supported:
l SafeNet SC650 smart cards with SafeNet PKI applet and SHAC middleware (Tera1
and Tera2 zero clients)
l Atos CardOS smart cards (Tera2 zero clients only)
l eToken 72k Pro USB user authentication devices (Tera1 and Tera2 zero clients)
l A new Use Existing Setting option has been added to specify whether the proximity
card reader beeps when a valid card is tapped on the reader. When selected, this option
uses the proximity card setting that has been configured outside of the zero client. This
feature is available from the AWI View Connection Server + Imprivata OneSign Session
page (Pre-session Reader Beep field), or you can configure a profile for zero clients
with this feature from the MC View Connection Server + Imprivata OneSign Session
page (Proximity Reader Beep Mode field).
2.2.3 Workstation-specific
l You can now configure "host wake" options from the OSD Direct to Host Session page.
Previously, this feature was only available on the AWI and MC.
l Local termination of keyboards and mice behind USB hubs is now supported provided all
devices attached to USB hub are HID keyboards and mice.
2.3 What's New in Firmware 4.0.3
The Teradici firmware 4.0.3 release supports the new Tera2 processor family to deliver
enhanced display capabilities, imaging performance, memory, power management, and
other important functions.
For example, the TERA2140 zero client can support up to four displays (DVI-D or
DisplayPort) and can perform image encoding at speeds of up to 300 million pixels per
second (Mpps) for remote workstations and 50 Mpps for virtual desktops. For complete
product details on second-generation PCoIP zero clients and host cards containing these new
Tera2 processors, see the Teradici website at http://www.teradici.com. For a list of all the
host cards and zero clients supported in this firmware release, see PCoIP Host Cards and
Zero Clients.
Note: For the Tera1 processor family, please use the firmware 4.0.2 release.
TER1206003 Issue 5 24
PCoIP® Zero Client and Host Administrator Guide