PCoIP Zero Client and Host Administrator Guide (Issue 5)

Table 4-58: MC Image Configuration Parameters
Parameter Description
Minimum Image Quality Lets you compromise between image quality and frame rate when
network bandwidth is limited. Some use cases may require lower-
quality images at a higher frame rate while others need higher-
quality images at a lower frame rate.
In environments where the network bandwidth is constrained, move
the slider towards Reduced to allow higher frame rates. Move the
slider towards Perception-Free to allow for higher image quality.
When network bandwidth is not constrained, the PCoIP system
maintains perception-free quality regardless of the Minimum Image
Quality parameter.
Note: The Maximum Initial Image Quality must be greater than or
equal to the Minimum Image Quality.
Maximum Initial Image
Quality
Move the slider towards Reduced to reduce the network bandwidth
peaks caused by screen content changes, but produce lower quality
images. Move the slider towards Perception-Free to produce higher
quality images but also higher bandwidth peaks.
This parameter limits the initial quality on the first display frame of a
screen change. Unchanged regions of the image are built to a
lossless state regardless of this parameter.
Note: The Maximum Initial Image Quality must be greater than or
equal to the Minimum Image Quality.
Image Quality
Preference
Move the slider towards Smoother Motion to result in a higher frame
rate at a lower quality level. Move the slider towards Sharper Image
to result in a lower frame rate at a higher quality level. The range is
from 0 to 100 in steps of 5.
Note: This setting does not work in PCoIP sessions with VMware
View virtual desktops running release 5.0 or earlier.
TER1206003 Issue 5 249
PCoIP® Zero Client and Host Administrator Guide