PCoIP Zero Client and Host Administrator Guide (Issue 5)

7.12.3 AWI Client: Image Settings
The Image page lets you make changes to the image quality of the PCoIP session. You can
display this page from the Configuration > Image menu.
Note: This setting applies only to sessions between zero clients and hosts.
Figure 4-64: AWI Client Image Page
Table 4-60: AWI Client Image Page Parameters
Parameter Description
Minimum Image Quality Lets you compromise between image quality and frame rate when
network bandwidth is limited. Some use cases may require lower-
quality images at a higher frame rate while others need higher-
quality images at a lower frame rate.
In environments where the network bandwidth is constrained, move
the slider towards Reduced to allow higher frame rates. Move the
slider towards Perception-Free to allow for higher image quality.
When network bandwidth is not constrained, the PCoIP system
maintains perception-free quality regardless of the Minimum Image
Quality parameter.
Note: The Maximum Initial Image Quality must be greater than or
equal to the Minimum Image Quality.
TER1206003 Issue 5 253
PCoIP® Zero Client and Host Administrator Guide