PCoIP Zero Client and Host Administrator Guide (Issue 5)

Connection Server to connect to a virtual desktop. For details, see MC: View Connection
Server Session Settings.
l Imprivata OneSign configuration enhancements: New parameters on the View
Connection Server – Imprivata OneSign page allow you to configure a OneSign server
desktop name. When the desktop pool list includes a pool with this name, the zero client
will start a session with this desktop. You can configure a profile with this option from
the MC: View Connection Server + Imprivata OneSign page, or you can configure a
specific zero client from the AWI Client: view Connection Server + Imprivata Onesign
page or OSD: View Connection Server + Imprivata Onesign page.
l Online help for administrators: PCoIP zero client and host card administrator
documentation is now delivered as online help in this release, with a full GUI Reference
that includes how to configure device firmware using three PCoIP administrator tools—
the MC, the AWI, and the OSD. It also contains topics for common PCoIP device
deployment scenarios, providing illustrations, descriptions, and links to configuration
details for each one.
2.5 What's New in Firmware 4.0.0
The Teradici firmware 4.0.0 release provides the following features and enhancements:
l Security enhancement when connecting to VMware View Connection server: New VCS
Certificate Check Mode options allow users to configure the client to reject, warn, or
allow an unverifiable connection. This feature is available from both the Administrator
Web Interface (AWI) and the Online Screen Display (OSD). You can also enable the
VCS Certificate Check Mode Lockout option on the AWI to prevent users from
changing the VCS Certificate Check Mode options from the OSD.
l Security enhancement: TLS 1.2 and Suite-B TLS ciphers are now supported for zero
clients and host cards.
l New "Preparing desktop..." overlay can be enabled for all connection types.
l When configuring a View Connection Server + Imprivata OneSign connection from
the AWI, you can now configure the client to connect to any appliance or only to
appliances with verified certificates.
l When configuring a Direct to Host session, the Wake host from low power state
setting in the advanced options now lets you configure the host's IP address as well as its
MAC address. In addition, the Peer MAC Address field has been removed from the
OSD Direct to Host advanced settings options. The wake host feature is now configured
from the AWI only.
l OSD advanced View Connection Server options now contain a new Desktop Name to
Select setting. Previously, this setting was only available from the AWI.
l The OSD now lets you configure a View Connection Server + Auto-Logon connection.
Previously, this connection could only be configured using the AWI and PCoIP
Management Console (MC).
TER1206003 Issue 5 26
PCoIP® Zero Client and Host Administrator Guide