PCoIP Zero Client and Host Administrator Guide (Issue 5)

l Force password change on next login
7.16 Configuring Audio Permissions
7.16.1 MC: Audio Permissions
The settings on this page let you configure a profile with the audio parameters to use for
hosts and clients.
Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
Figure 4-72: MC Audio Permissions
Table 4-68: MC Audio Permissions Parameters
Parameter Description
Enable HD Audio Enable to configure audio support on the device.
Note: This property must be enabled on both the host and the client.
When disabled, the audio hardware is not available for the host operating
system to enumerate.
Note: This property requires a device restart after being changed.
Enable Audio Line
In
This property determines the input mode the audio system advertises to the
host operating system. When enabled, the line-in connector found on the
client is used as a standard line-in input. When disabled, the line-in
connector found on the client is used as a microphone input.
TER1206003 Issue 5 265
PCoIP® Zero Client and Host Administrator Guide