PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Enable Microsoft
Windows Vista 64-
bit Mode
Enable this option for Windows Vista 64-bit and Windows 7 64-bit version
operation systems.
Warning: Do NOT use this mode with Windows XP 64 or 32-bit operating
systems.
You do not have to enable the 64-bit mode for Linux 64-bit operating
systems. Linux kernels should be compiled with the latest PCoIP audio
CODEC support.
Note: This property requires a device restart after being changed.
7.16.2 AWI Tera1 Host: Audio Permissions
You can configure the audio permissions from the Initial Setup page when you start your
first session.
For subsequent sessions, use the Audio page (accessed from the Permissions > Audio
menu) to configure the audio permissions for the device. After you update the options on this
page, click Apply to save your changes.
To display the Audio page from the Administrative Web Interface, select the Permissions
menu, and then click Audio.
Figure 4-73: AWI Tera1 Host Audio Page
Table 4-69: AWI Tera1 Host Audio Page Parameters
Parameter Description
Enable HD Audio Enable to configure audio support on the device.
Note: This property must be enabled on both the host and the client.
When disabled, the audio hardware is not available for the host operating
system to enumerate.
TER1206003 Issue 5 266
PCoIP® Zero Client and Host Administrator Guide