PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Enable Microsoft®
Windows Vista® /
Windows® 7 64-
bit Mode
Enable this option for Windows Vista 64-bit and Windows 7 64-bit version
operation systems.
Warning: Do NOT use this mode with Windows XP 64 or 32-bit operating
systems.
You do not have to enable the 64-bit mode for Linux 64-bit operating
systems. Linux kernels should be compiled with the latest PCoIP audio
CODEC support.
Enable Audio Line
In
This property determines the input mode the audio system advertises to the
host operating system. When enabled, the line-in connector found on the
client is used as a standard line-in input. When disabled, the line-in
connector found on the client is used as a microphone input.
Note: Follow the onscreen instructions if you have Windows Vista or
Windows 7 installed on the device.
7.16.3 AWI Tera2 Host: Audio Permissions
You can configure the audio permissions from the Initial Setup page when you start your
first session.
For subsequent sessions, use the Audio page (accessed from the Permissions > Audio
menu) to configure the audio permissions for the device. After you update the options on this
page, click Apply to save your changes.
To display the Audio page from the Administrative Web Interface, select the Permissions
menu, and then click Audio.
Figure 4-74: AWI Tera2 Host Audio Page
TER1206003 Issue 5 267
PCoIP® Zero Client and Host Administrator Guide