PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Remote Host Power
Control
Configure the functionality of the client's remote PC button.
The host is commanded to perform a soft power off (i.e., to go into
sleep mode) when the client's remote PC button is pressed for less
than four seconds and soft power off is enabled.
The host is commanded to perform a hard power off (i.e., to shut
down) when the client's remote PC button is pressed for more than
four seconds and hard power off is enabled.
Select from the following options:
l Power-off not permitted: Users cannot shut down the host or put
it in sleep mode.
l Soft Power-off only: Users can put the host in sleep mode but
not shut it down.
l Hard Power-off only: Users can shut down the host but not put it
in sleep mode.
l Soft and Hard Power-off: Users can put the host in sleep mode
and shut it down.
7.17.5 OSD Tera2: Power Settings
The settings on this page let you configure timeout and power settings for the client. You
can display this page from the Options > Configuration > Power menu.
TER1206003 Issue 5 274
PCoIP® Zero Client and Host Administrator Guide