PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-80: OSD Power Page
Table 4-76: OSD Power Parameters
Parameter Description
OSD Screen-Saver
Timeout
Configure the number of seconds to wait after a period of inactivity
(i.e., no keyboard or mouse action) before the client puts its attached
displays into low power mode. Valid values are 10 to 9999, or use 0
to disable the feature.
Note: This timeout only applies when the device is not in session.
Display Suspend
Timeout
Configure the number of seconds to wait after a period of inactivity
(i.e., no keyboard or mouse action) before the client puts its attached
displays into low power mode. Valid values are 10 to 14400
seconds, or use 0 to disable the feature.
Note: This timeout only applies when the device is in session.
7.17.6 OSD Tera1: Power Settings
The setting on this page lets you configure the monitor screen-saver timeout for the client.
You can display this page from the Options > Configuration > Power menu.
TER1206003 Issue 5 275
PCoIP® Zero Client and Host Administrator Guide