PCoIP Zero Client and Host Administrator Guide (Issue 5)

Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
Figure 4-82: MC Host Driver Configuration
Table 4-78: MC Host Driver Configuration Parameters
Parameter Description
Enable Host
Driver
When enabled, lets you access the PCoIP host software UI on the host
computer. This software lets users enable features such as the following:
l Using the local cursor and keyboard feature
l Locking the host PC when a session is terminated
l Using the Wake-on-LAN function
l Viewing host and client network parameters
l Disconnecting a session
l Viewing host statistics and connection information
l Using the client display topology settings on the host
When disabled, you do not have access to the PCoIP host software UI on
the host computer.
Note: This property requires a device restart after being changed.
7.18.2 AWI Host: Host Driver Function
The setting on this page lets you enable or disable the PCoIP host software UI on the host
computer. You can access this page from the Configuration > Host Driver Function
menu.
Note: For information about how to install and use the PCoIP host software, see the
"PCoIP® Host Software for Windows User Guide" (TER1008001).
TER1206003 Issue 5 277
PCoIP® Zero Client and Host Administrator Guide