PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-83: AWI Host Driver Function Page
Table 4-79: AWI Host Driver Function Parameters
Parameter Description
Enable Host
Driver Function
When enabled, lets you access the PCoIP host software UI on the host
computer. This software lets users enable features such as the following:
l Using the local cursor and keyboard feature
l Locking the host PC when a session is terminated
l Using the Wake-on-LAN function
l Viewing host and client network parameters
l Disconnecting a session
l Viewing host statistics and connection information
l Using the client display topology settings on the host
When disabled, you do not have access to the PCoIP host software UI on
the host computer.
7.19 Configuring the Event Log
7.19.1 MC: Event Log Settings
The settings on this page let you configure a profile with event log messaging to use for a
host or client, and to set the log filtering mode on a device.
You can also enable and configure syslog as the logging protocol to use for collecting and
reporting events.
Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
TER1206003 Issue 5 278
PCoIP® Zero Client and Host Administrator Guide