PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-84: MC Event Log Control
Table 4-80: MC Event Log Control Parameters
Parameter Description
Enable Diagnostic
Log
When enabled, the device will include connection management-specific
messages in the device's event log.
Event Log Filter
Mode
Configure the event log filtering mode as terse or verbose.
Syslog Server
Hostname
Enter the IP address or fully qualified domain name of the syslog server to
which the host or client will send event log messages.
Syslog Server Port Enter port number of the syslog server.
Note: The default port number value is 514.
Syslog Facility
Number
Enter the facility number for all syslog messages generated by the device.
TER1206003 Issue 5 279
PCoIP® Zero Client and Host Administrator Guide