PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Syslog Host IPAddress /
Syslog Host DNS name
The parameter that displays depends on which option you choose to
identify the syslog server host:
l IP Address: Enter the IPaddress for the syslog server host.
l FQDN: Enter the DNS name for the syslog server host.
Note: If you enter an invalid IP address or DNS name, a message
appears to prompt you to correct it.
Syslog Host Port Enter port number of the syslog server.
Note: The default port number value is 514.
Syslog Facility The facility is a number attached to every syslog message used to
categorize the source of the syslog messages. The facility is part of
the standard syslog header and can be interpreted by all syslog
servers.
Enter a facility to suit your logging needs. For example, you could
configure devices as follows:
l Zero clients to use facility 19
l Cisco routers to use facility 20
l VMware ESX hosts to use facility 21
Note: The default facility is set to “19 – local use 3”. Cisco routers
default to “23 – local use 7”.
TER1206003 Issue 5 282
PCoIP® Zero Client and Host Administrator Guide