PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-88: MC IPv6 Configuration
Table 4-84: MC IPv6 Configuration Parameters
Parameter Description
Enable IPv6 This property determines if the device uses IPv6. IPv6 is not enabled
by default.
Note: This property requires a device restart after being changed.
IPv6 Domain Name If DHCPv6 is enabled, this is the value returned by DHCPv6;
otherwise, it is the static setting.
Note: This property requires a device restart after being changed.
Enable DHCPv6 Determines if the device uses DHCPv6 to obtain IPv6 addresses
(stored in IPv6 DHCP Address 1-4). DHCPv6 is enabled by default.
Note: This property requires a device restart after being changed.
Enable SLAAC Determines if the endpoint uses Stateless Address Auto-
configuration (SLAAC IPv6) to obtain IPv6 addresses (stored in IPv6
SLAAC Address 1-4). SLAAC is enabled by default.
Note: This property requires a device restart after being changed.
IPv6 Gateway Address Configures the IPv6 gateway address (e.g.,
"FD0F:EC91:16F9:201:215:58FF:FEA0:1565"). This is the value
provided in Router Advertisements (if enabled); otherwise, it is the
static setting.
Note: This property requires a device restart after being changed.
TER1206003 Issue 5 286
PCoIP® Zero Client and Host Administrator Guide