PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
IPv6 Gateway Address
Prefix Length
Configures the IPv6 gateway address prefix length (e.g., 64). This is
the value provided in Router Advertisements (if enabled); otherwise,
it is the static setting.
Note: This property requires a device restart after being changed.
IPv6 Primary DNS
Address
Configures the IPv6 address of the primary DNS server (e.g.,
"FD0F:EC91:16F9:201:215:58FF:FEA0:7824"). If DHCPv6 is
enabled, this is the value returned by DHCPv6; otherwise, it is the
static setting.
Note: This property requires a device restart after being changed.
IPv6 Primary DNS
Address Prefix Length
Configures the IPv6 address prefix length of the primary DNS server
(e.g., 64). If DHCPv6 is enabled, this is the value returned by
DHCPv6; otherwise, it is the static setting.
Note: This property requires a device restart after being changed.
IPv6 Secondary DNS
Address
Configures the IPv6 address of the secondary DNS server (e.g.,
"FD0F:EC91:16F9:201:215:58FF:FEA0:7827"). If DHCPv6 is
enabled, this is the value returned by DHCPv6; otherwise, it is the
static setting.
Note: This property requires a device restart after being changed.
IPv6 Secondary DNS
Address Prefix Length
Configures the IPv6 address prefix length of the secondary DNS
server (e.g., 64). If DHCPv6 is enabled, this is the value returned by
DHCPv6; otherwise, it is the static setting.
Note: This property requires a device restart after being changed.
7.21.2 AWI: IPv6 Settings
The settings on this page let you enable IPv6 for PCoIP devices connected to an IPv6
network.
Note: IPv6 is not currently supported by VMware View.
You can access this page for the host or client from the Configuration > IPv6 menu.
TER1206003 Issue 5 287
PCoIP® Zero Client and Host Administrator Guide