PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Secondary DNS The device's secondary DNS IP address. If DHCPv6 is enabled, this
field is automatically populated by the DHCPv6 server.
Domain Name The domain name used (e.g., "domain.local") for the host or client. If
DHCPv6 is enabled, this field is automatically populated by the
DHCPv6 server.
FQDN The fully qualified domain name for the host or client. If DHCPv6 is
enabled, this field is automatically populated by the DHCPv6 server.
Enable SLAAC Enable this field to set up Stateless Address Auto-configuration
(SLAAC) for your devices.
SLAAC Addresses When SLAAC is enabled and the device is rebooted, these fields are
automatically populated.
Enable Manual Address Enable this field to set up a manual (static) address for the device.
Manual Address Enter the IP address for the device.
7.21.3 OSD: IPv6 Settings
The settings on this page let you enable IPv6 for PCoIP devices connected to an IPv6
network.
Note: IPv6 is not currently supported by VMware View.
You can access this page from the Options > Configuration > IPv6 menu.
TER1206003 Issue 5 289
PCoIP® Zero Client and Host Administrator Guide