PCoIP Zero Client and Host Administrator Guide (Issue 5)

Parameter Description
Domain Name The domain name used (e.g., "domain.local") for the host or client. If
DHCPv6 is enabled, this field is automatically populated by the
DHCPv6 server.
FQDN The fully qualified domain name for the host or client. If DHCPv6 is
enabled, this field is automatically populated by the DHCPv6 server.
Enable SLAAC Enable this field to set up Stateless Address Auto-configuration
(SLAAC) for your devices.
SLAAC Addresses When SLAAC is enabled and the device is rebooted, these fields are
automatically populated.
Enable Manual Address Enable this field to set up a manual (static) address for the device.
Manual Address Enter the IP address for the device.
7.22 Configuring SCEP
7.22.1 MC: SCEP Settings
Simple Certificate Enrollment Protocol (SCEP) lets you simplify the retrieval and
installation of digital certificates by allowing devices to obtain certificates automatically
from a SCEP server. This feature is available for Tera2 zero clients only.
The settings on this page let you configure a profile with SCEP settings. When the profile is
applied, the zero clients will submit a request for certificates to the specified SCEP server.
Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
TER1206003 Issue 5 291
PCoIP® Zero Client and Host Administrator Guide