PCoIP Zero Client and Host Administrator Guide (Issue 5)

Figure 4-91: MC SCEPConfiguration
Table 4-87: MC SCEP Configuration Parameters
Parameter Description
SCEP Server URI Enter the URL for the SCEP server that is configured to issue
certificates for the device.
Challenge Password Enter the password to present to the SCEP server.
Note: This password will be used for all the zero clients associated
with this profile.
Use Certificate for
802.1X
Specify whether or not the obtained client certificate will be used for
802.1x authentication.
7.22.2 AWI Tera2 Client: SCEP Settings
Simple Certificate Enrollment Protocol (SCEP) lets you simplify the retrieval and
installation of digital certificates by allowing devices to obtain certificates automatically
from a SCEP server. This feature is available for Tera2 zero clients only.
You can access this page from the Configuration > SCEP menu.
To retrieve certificates for a device, enter the URL and password for the SCEP server, and
then click Request Certificates. Root CA and 802.1x certificates display after these
certificates are installed.
TER1206003 Issue 5 292
PCoIP® Zero Client and Host Administrator Guide