PCoIP Zero Client and Host Administrator Guide (Issue 5)
Figure 4-92: AWI SCEP Page
Table 4-88: AWI SCEP Parameters
Parameter Description
SCEP Server URL Enter the URL for the SCEP server that is configured to issue
certificates for the device.
Challenge Password Enter the password to present to the SCEP server.
Root CA Displays the name of the root CAcertificate that has been installed in
the device.
Client Certificate Displays the name of the client certificate that has been installed in
the device.
Request Certificates After entering the SCEP server address and password, click this
button to retrieve certificates.
Status Displays the status of the request (e.g., in progress, successful,
failed).
7.22.3 OSD Tera2: SCEP Settings
Simple Certificate Enrollment Protocol (SCEP) lets you simplify the retrieval and
installation of digital certificates by allowing devices to obtain certificates automatically
from a SCEP server. This feature is available for Tera2 zero clients only.
You can access this page from the Options > Configuration > SCEP menu.
To retrieve certificates for a device, enter the URL and password for the SCEP server, and
then click Request Certificates. Root CA and 802.1x certificates display after these
certificates are installed.
TER1206003 Issue 5 293
PCoIP® Zero Client and Host Administrator Guide