PCoIP Zero Client and Host Administrator Guide (Issue 5)
Figure 4-93: OSD Tera2 SCEP Page
Table 4-89: OSD Tera2 SCEP Page Parameters
Parameter Description
SCEP Server URL Enter the URL for the SCEP server that is configured to issue
certificates for the device.
Challenge Password Enter the password to present to the SCEP server.
Root CA Displays the name of the root CAcertificate that has been installed in
the device.
Client Certificate Displays the name of the client certificate that has been installed in
the device.
Request Certificates After entering the SCEP server address and password, click this
button to retrieve certificates.
Status Displays the status of the request (e.g., in progress, successful,
failed).
7.23 Configuring the Display Topology
7.23.1 MC: Display Topology Settings
The settings on this page let you configure a profile with the display topology to use for
Tera1 and Tera2 clients.
Note: Use the Dual-Display Zero Client layout for TERA2321 zero client devices.
TER1206003 Issue 5 294
PCoIP® Zero Client and Host Administrator Guide